巢湖科目四英文版题目

1. How to follow a motor vehicle safely on the road?

A. Observe the front vehicle conditions

B. Drive on the left side of the road as far as possible

C. Be ready to slow down at any time

D. Keep a safe distance

Answer: ACD

2. When passing a turn or a curve section, the driver should slow down and disengage the clutch.

A. Right

B. Wrong

Answer: B

3. Where can not park?

A. Parking lot

B. Parking spaces on roads

C. Landslide and debris flow in Mountainous Areas

D. Crosswalk

Answer: CD

4. What should motor vehicle drivers do when approaching an oncoming vehicle on a frozen road?

A. Cut speed as approaching each other

B. Pass each other by speeding up properly

C. Pass each other slowly by cutting speed in advance

D. Pass each other along the central line to the best

Answer: C

5. When driving in rain and encountering pedestrians with umbrellas or wearing raincoats, what should be done by motor vehicle drivers in order to yield?

A. Drive at a normal speed

B. Sound the horn to alert when approaching the pedestrians

C. Speed up and bypass on the left

D. Reduce speed and sound the horn in advance

Answer: D

6. When passing through a tunnel, the wrong measure is to ___________.

A. Keep safe distance when two vehicles cross each other

B. Driving with the low beam light

C. Use the hight beam light when two vehicles cross each other

D. Overtaking in the tunnel

Answer: CD

7. What is the meaning of this sign?

A. No right turn

B. No U turn

C. No going straight

D. No left turn

Answer: C

8. What is the purpose of checking before driving?

A. Confirm whether the tyres of motor vehicles are damaged or not

B. Confirm whether there is a safety hazard near the vehicle.

C. Confirm whether there are obstacles around the vehicle

D. Confirm whether the road in front of the vehicle is safe

Answer: ABCD

9. Which of the following is an inflammable solid material?

A. Matches

B. Fireworks

C. Calcium carbide

D. Explosives

Answer: A

10. How should lamps be used when motor vehicle drivers pass through a two-way tunnel?

A. Turn on the hazard lamps

B. Turn on the high-beam

C. Turn on the fog lamp

D. Turn on the low-beam

Answer: D

11. A correct measure to avoid tire burst of motor vehicles is to lower the tire pressure.

A. Right

B. Wrong

Answer: B

12. What is the meaning of this sign?

A. Muddy road

B. Low-lying road

C. Overflowing road

D. Ferry

Answer: C

13. When a motor vehicle encounters a burning phenomenon, it should leave the vehicle quickly so as not to cause injury or asphyxia to the respiratory tract.

A. Right

B. Wrong

Answer: A

14. Which of the following is a safe way for motor vehicles to pass the intersection marked with this sign?

A. Stop and observe the traffic situation around the intersection

B. Approach the intersection by speeding up

C. Observe the traffic situation on the left rear side

D. Approach the intersection at a reduced speed

Answer: D

15. When the engine suddenly stalls on the road, what should the driver do?

A. Stop the vehicle and overhaul it immediately

B. Immediately turn on the hazard lamps

C. Move the vehicle to a place where it will not obstruct the traffic flow

D. Set up a breakdown warning sign

Answer: BCD

16. When a gas tanker is leaking heavily, which of the following measures is wrong?

A. Cut off the power

B. Wear gas mask and protect gloves

C. Turn off the valve to stop leaking

D. Evacuate people to the leeward side

Answer: D

17. When seeing this sign, the driver should reduce speed and observe the road conditions.

A. Right

B. Wrong

Answer: A

18. What is the meaning of this sign?

A. Crosswalk lights

B. Watch for pedestrians

C. Attention to traffic lights

D. Intersection

Answer: C

19. When driving on a road covered with ice and snow, drivers tend to encounter glare caused by reflection of light rays from the road surface.

A. Right

B. Wrong

Answer: A

20. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D