兴安科目四模拟考试英文版

1. When a motor vehicle passes over an overflowing bridge, what should the driver do after stopping and observing closely?

A. Change to a high gear and pass rapidly

B. Constantly observe the changes of the flow

C. Prepare to stop at any time

D. Change to a low gear and pass through at a constant speed

Answer: D

2. What is the meaning of this sign?

A. No long time honking

B. Honk discontinuously

C. Reduce speed and honk

D. No honking

Answer: D

3. Which of the following acts are prohibited when passing through a tunnel?

A. Overtaking

B. Stopping

C. Making a U-turn

D. Reversing

Answer: ABCD

4. Which of the following is a basic requirement for rescuing the injured at the scene of a traffic accident?

A. Treat wounds first and safe life later

B. Save life first and treat wounds later

C. Help lightly wounded persons first

D. Help seriously wounded persons later

Answer: B

5. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. Decrease sharply

D. No change

Answer: C

6. How should a motor vehicle follow the other vehicle In front when driving on a road covered with ice and snow?

A. Keep a long safe distance

B. Turn on hazard lamp

C. Change between high-and-low beam alternatively

D. Sound the horn in due time to give a notice to the vehicle in front

Answer: A

7. When driving in icy and snowy weather, ________.

A. The tires can easily spin

B. The braking distance becomes longer

C. The tires can easily drift

D. Vehicle handling becomes more difficult

Answer: ABCD

8. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

9. What is the meaning of this sign?

A. Stopping temporarily is allowed

B. Long stopping is allowed

C. No long stopping

D. No stopping

Answer: D

10. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

11. What is the meaning of this sign?

A. No changing lane

B. No left turn

C. No going straight

D. No U turn

Answer: D

12. What matters need attention when driving on a rainy day?

A. Avoid using the emergency brake or making sharp turns

B. Keep a safe enough distance

C. Observe the traffic situation of non-motor vehicles and surrounding pedestrians

D. Drive at a safe speed

Answer: ABCD

13. When a vehicle encounters a strong side wind in a mountain valley, the driver should drastically turn the steering handlebar to adjust the direction of the vehicle if he feels the vehicle deviates from the normal direction.

A. Right

B. Wrong

Answer: B

14. What is the meaning of this sign?

A. Speed up when the driver can not see the pedestrians

B. Speed up

C. There is a crosswalk ahead.

D. Keep driving at the same speed when you can not see the pedestrians

Answer: C

15. When a motor vehicle passes over an inundated road the driver should change to a low gear and pass at a constant speed.

A. Right

B. Wrong

Answer: A

16. What should be done by the driver who intends to overtake but the motor vehicle in front neither reduces its speed nor allows the right of way?

A. Continuously sounding the horn and accelerating to overtake

B. Accelerating and continuing to overtake

C. Refraining from overtaking

D. Following the vehicle in front closely and finding a chance to overtake

Answer: C

17. Speeding up to go though the intersection before the light turns to red in this case.

A. Right

B. Wrong

Answer: B

18. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: B

19. When driving, the driver should yield to _______.

A. Ambulance

B. Fire engine

C. School bus

D. Police car

Answer: ABCD

20. When driving on a rough road, the driver should use low gear to keep low speed; try to choose roads with big pits to reduce bumpy feeling.

A. Right

B. Wrong

Answer: B