通辽科目四英语pdf

1. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C

2. When the tire pressure is too low, what will happen if the tire changes its shape in waves and increases in temperature due to fast movement?

A. Unstable tire pressure

B. Even lower tire pressure

C. Driving resistance increases

D. Tire burst

Answer: D

3. What is the meaning of this sign?

A. Continuous down slopes

B. Steep downhill road

C. Steep uphill road

D. Continuous up slopes

Answer: A

4. When encountering children on the road, the driver should _________.

A. Reduce speed and go slowly, or stop to yield when necessary

B. Continuously honk to urge

C. Swiftly bypass from one side

D. Speed up and bypass

Answer: A

5. While driving a motorcycle, it is permitted to keep one hand on the handlebar but not allowed two hands leave handle bars at the same time.

A. Right

B. Wrong

Answer: B

6. What is the most frequent problem for driving on a muddy road?

A. High resistance force

B. Sideways slide

C. The motor vehicle bumps

D. Steering failure

Answer: B

7. When the tire pressure is too low, what can happen when driving at a high speed?

A. Tire pressure will be unstable

B. Tire pressure will increase

C. Driving resistance will decrease

D. The tire will burst

Answer: D

8. What is the meaning of this sign?

A. Driving at reduced speed in the section of 40 meters

B. Minimum speed is 40km/hr

C. Maximum speed is 40km/hr

D. 40km/hr speed limit ban is lifted

Answer: D

9. when passing an intersection without traffic lights, the driver finds people are crossing the street, the wrong measure for the driver to take is to __________.

A. Reduce speed or stop and yield

B. Honk to urge the pedestrians

C. Bypass

D. Weave through the pedestrians

Answer: BCD

10. When two vehicles approach each other on a foggy day, what is the best method of safe driving?

A. Turn on the high-beam

B. Slowdown and maintain a large safety distance

C. Turn on the low-beam

D. Turn on the fog lamp

Answer: B

11. What is the meaning of this sign?

A. A manned level crossing

B. Multi-crossing of railway and road

C. Grade separation level crossing

D. An unmanned level crossing

Answer: A

12. When a bicycle occupies the motor vehicle lane and obstructs the traffic, the driver should sound the horncontinuously and speed up to bypass on the left of the bicycle.

A. Right

B. Wrong

Answer: B

13. When driving on a road covered with ice and snow, the motor vehicle may spin or slide when increasing the speed urgently, due to the loss of vehicle stability.

A. Right

B. Wrong

Answer: A

14. Which is correct when riding a motorcycle

A. Both hands can temporarily leave the steering handle bar

B. Voluntarily operate the steering handle bar

C. It is prohibited to simultaneously move two hands from the steering handle bar

D. It is able to statically turn the steering handle bar

Answer: C

15. The wrong method to rescue a poisoned person in a traffic accident is to ______.

A. Bring him to a place where air is fresh

B. Take off clothes that are exposed to toxic air

C. Clean exposed areas with clean water

D. Stay in the original place and wait for the rescue personnel

Answer: D

16. It is unsafe to ride a motorcycle by high-heel shoes.

A. Right

B. Wrong

Answer: A

17. Whats the meaning of this sign?

A. Pass with low speed

B. Watch for pedestrians

C. On foot

D. Pedestrians go first

Answer: C

18. When there is bleeding at the bone fracture of a wounded person, the first thing to do is to keep it in position before stopping the bleeding and dress the wound.

A. Right

B. Wrong

Answer: B

19. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

20. When approaching another vehicle at night, why should the driver alternate between high-and-low-beam at a distance more than 150 meters?

A. Warn each other before passing

B. Driving habit

C. Easy to observe the situation ahead from either side

D. Courtesy

Answer: C